Escudo de la República de Colombia Escudo de la República de Colombia
 

Doctorado en Ciencia y Tecnología de Materiales

DOCTORADO EN INGENIERÍA – CIENCIA Y TECNOLOGÍA DE MATERIALES

La apertura del programa de Doctorado en Ingeniería – Ciencia y Tecnología de Materiales en la Facultad de Ingeniería de la Universidad Nacional de Colombia, fue aprobada por el Consejo Académico de la universidad en Julio de 2007 e inició sus labores en el primer semestre de 2008.

En dicho programa participan investigadores y grupos de investigación pertenecientes a las Facultades de Ingeniería y Ciencias, donde colaboran las áreas curriculares de Ingeniería Mecánica y Mecatrónica, Ingeniería Civil y Agrícola, Ingeniería Química, Física y Química, además cuenta con el apoyo de la Facultad de Odontología y el Instituto de Extensión e Investigación.

La ciencia y la ingeniería de materiales ha sido reconocida en varios documentos y planes de desarrollo de entes internacionales y nacionales, como un área de conocimiento vital para el desarrollo de los países, abarcándose temáticas tan importantes como la nanotecnología, los tratamientos superficiales, procesamiento de materiales por láser y plasma, sensórica, biomateriales, materiales inteligentes, nuevos materiales, soldadura, superconductores, semiconductores, prototipado rápido, superaleaciones, etc. Por lo anterior es importante que en el país se formen investigadores con grado doctoral en dicha área, para contribuir así a la supervivencia de la industria nacional y fomentar la creación de nuevas empresas de base tecnológica, vitales para la actual economía globalizada.

INFORMACIÓN GENERAL

  • Nivel de Formación: Doctorado
  • Tipo de Plan de Estudios: Investigación
  • Programa: Doctorado en Ingeniería - Ciencia y Tecnología de Materiales
  • Título: Doctor en Ingeniería
  • Código SNIES: 53272
  • Año de Creación: 2005
  • Año de Apertura: 2007
  • Sede: Bogotá
  • Facultad: Ingeniería
  • Duración en semestres:8
  • Créditos totales:135
  • Costo semestral en puntos (detallado):
  • Derechos Académicos

    200

    Derechos Administrativos

    30

    Bienestar

    10

    Póliza

    24,890 COP

  • Valor del punto: 1 Día del Salario Mínimo Mensual Legal Vigente (SMMLV) 2021 con base en la (Circular 025 de 2020 - Secretaría General el valor del punto es $30,284 COP
  • Costo aproximado actual semestre: $7,293,050 COP

PERFIL

Perfil del Aspirante

Podrán participar como aspirantes a este Programa otros perfiles profesionales diferentes a los de Ingeniería y Ciencias Naturales, cuyos planes de estudios vistos en el Pregrado y/o la Maestría tengan las materias, la intensidad y los contenidos que el Comité Asesor del Postgrado, considere que cumplen con los requisitos mínimos para desarrollar con éxito el tema de investigación a tratar y que sean autorizados por el Consejo de la Facultad de Ingeniería.

Perfil del Egresado

Los egresados de este programa estarán en capacidad de relacionar la estructura con las propiedades y el desempeño de los materiales, proponer, dirigir y realizar investigación de manera autónoma, producir conocimiento original, aplicar el conocimiento generado en la solución de problemas del mundo real, participar en la construcción de comunidades académicas en las áreas de la síntesis y procesamiento de materiales y transferir los resultados de la investigación al sector productivo, para contribuir al desarrollo, modernización e innovación tecnológica de la industria nacional.

OBJETIVOS

Los objetivos generales del programa son:

  • Realizar investigación y desarrollo para incrementar el volumen de conocimientos y la creación de nuevas aplicaciones para ampliar la capacidad tecnológica del país.
  • Capacitar profesores universitarios que desarrollen y mejoren el trabajo docente e investigativo en ingeniería en la región y el país.
  • Fortalecer la interacción Universidad-Industria para el desarrollo de estudios e investigaciones y para el intercambio de experiencias en el campo de la ingeniería y en particular de materiales y su procesamiento.
  • Formar investigadores.
  • Fortalecer las líneas de investigación en el área de Ciencia e Ingeniería de Materiales que sirven de base al programa de doctorado y al programa de maestría que se desarrolla actualmente.

Los objetivos específicos de formación del plan de estudios son:

  • Formar recursos humanos de un alto nivel académico para contribuir a la creación de nuevo conocimiento en las áreas de la Ciencia e Ingeniería de los Materiales.
  • Formar recursos humanos con capacidad y liderazgo para establecer y dirigir grupos de investigación.

PLAN DE ESTUDIOS

Actividades Académicas y Asignaturas

Créditos

Tesis

90

Proyecto de Tesis

13

Seminarios de Investigación

6

Examen de calificación

6

Total Actividades Académicas

115

Asignaturas Elegibles

20

Total Créditos Investigación

135

CURSOS OFERTADOS


Obteniendo datos del Sistema de Información Acádemica SIA

NOTA:

  • La oferta de cursos varía cada semestre. **Para ver el listado completo de cursos ofertados dirijase a https://siabog.unal.edu.co/buscador

  • Los horarios de las asignaturas de posgrado suelen estar en las franjas de 7:00 a 9:00 y de 18:00 a 20:00.

INVESTIGACIÓN

Lineas de investigación

  • Ingeniería de superficies
  • Procesos de manufactura y metalurgia
  • Materiales poliméricos
  • Mecánica estructural optimización y modelamiento de materiales
  • Materiales cerámicos y compuestos
  • Nanomateriales
  • Materiales para Construcción y Desarrollo Sostenible

ADMISIONES

Doctorado en Ingeniería - Ciencia y Tecnología de Materiales

Convocatoria 2025-2S

Si usted finalizó estudios de pregrado Universidad Nacional de Colombia, aún dispone de créditos y está interesado en obtener el beneficio para cursar estudios de posgrado en la universidad, acceda a este enlace para mayor información http://www.legal.unal.edu.co/rlunal/home/doc.jsp?d_i=36926

Si usted es estudiante extranjero, acceda a este enlace para mayor información Aspirantes Extranjeros Se aclara que los certificados de admisión/ cartas de aceptación (en caso de ser requeridos) son expedidos exclusivamente a los aspirantes seleccionados por la Universidad Nacional en el proceso de admisión establecido.

If you are a foreign student, click on the link for more information Aspirantes Extranjeros. We clarified that the certificates of admission / acceptance letters (if required) are issued only to applicants selected by the National University in the admissions process established.


La modalidad de estudio es diurno, presencial, de tiempo completo. La admisión al doctorado es un proceso no masivo y permanente.

La aplicación al proceso de admisión al doctorado se realiza a través de los siguientes pasos (los pasos del 1 al 5 se deben realizar entre el 31 de marzo de 2025 y el 26 de junio de 2025).

GUÍA PASO A PASO

  • Consultar y seguir la guía paso a paso de la Dirección de Admisiones de la Universidad Nacional de Colombia.
  • Verificar requisito de idioma: revisar los requisitos publicados en la guía paso a paso de la Dirección de Admisiones.
  • Pagar los derechos de inscripción: el comprobante de pago contiene un número PIN que requiere para poder formalizar la inscripción. El costo de los derechos de inscripción y demás detalles deben ser consultados en la guía paso a paso de la Dirección de Admisiones.
  • Formalizar la inscripción vía Internet: omitir la fecha indicada en la guía paso a paso de la Dirección de Admisiones, ya que esta admisión es permanente. Se realiza ingresando al enlace “Formalizar la inscripción” en la página de admisiones a Posgrado. Si realizó el pago electrónico, una vez terminada la transacción encontrará el enlace "Continuar Inscripción", si elige está opción podrá formalizar su inscripción.
  • Recepción de documentos digitales en plataforma: diligenciar la aplicación web de la Facultad para radicar hojas de vida y soportes de aspirantes. Le serán enviadas las fechas e instrucciones al correo electrónico con el que formalizó la inscripción en el sistema de admisiones.
  • Entrega de la propuesta preliminar de proyecto de investigación: propuesta preliminar del tema de tesis o de investigación, se recomienda que no supere 5 páginas. Debe ser acompañada de una carta de aval de un profesor o profesora del Doctorado quien será su tutor.
  • Publicación de citación a pruebas finales (presentación de la propuesta preliminar): será enviada una notificación al correo electrónico con el que formalizó la inscripción en el sistema de admisiones, informando la fecha hora de la presentación de la prueba. La prueba se realizará por videoconferencia, mediante la plataforma Google Meet.
  • Aplicación de las pruebas finales (ENTREVISTA): las entrevistas se realizarán por videoconferencia mediante la plataforma Google Meet. La información de acceso a la plataforma será enviada al correo electrónico con el que formalizó la inscripción en el sistema de admisiones.
  • Consultar la publicación de resultados finales: para consultar los resultados, ingrese a la página https://admisiones.unal.edu.co/posgrado/ , en el enlace “Consultar resultados de admisión”, según el calendario establecido en la convocatoria correspondiente.

DOCUMENTOS REQUERIDOS

HOJA DE VIDA

  • Documento de identificación.
  • Tarjeta profesional*
  • Soportes de estudios universitarios:
    • Acta de grado.
    • Diploma.
    • Certificado de notas.
    • Documento legalizado mediante apostilla o delegación diplomática (en caso de títulos obtenidos en el extranjero).
    • Certificado de culminación de estudios expedido por la institución donde desarrolló los estudios (para estudiantes que aún no tienen el título de pregrado).
    • Reporte de Historia Académica (para los estudiantes de pregrado de la Universidad Nacional de Colombia con opción de grado de materias de posgrado).
  • Distinciones Académicas*:
    • Nombre de la distinción, institución que otorga, fecha en que se otorgó y adjuntar soporte.
  • Experiencia Laboral*:
    • Nombre de la institución o empresa, tipo de vinculación, fecha de inicio y de finalización(o en curso), cargo, función principal y adjuntar soporte.
  • Experiencia Docente*:
    • Nombre de la institución, dedicación, fecha de inicio y de finalización (o en curso), áreas de trabajo, información de asignaturas impartidas e intensidad de horas por semana y adjuntar soporte.
  • Experiencia Investigativa*:
    • Nombre de la investigación, institución, área del proyecto, entidad financiadora, funciones principales, fecha de inicio de vinculación y de finalización (o en curso), país y adjuntar soporte.
  • Producción Intelectual*:
    • Tipo de producción (artículo en revista indexada, libro, capítulo de libro, patente, software, planta piloto, diseño industrial, otra producción), datos de la producción y adjuntar soporte.
  • Referencias académicas o profesionales:
    • La aplicación web le solicitará los datos básicos de contacto de dos personas que realizarán el registro de 2 referencias académicas. La información diligenciada por las personas que usted indique es confidencial y será de conocimiento únicamente para las directivas del programa durante el proceso de evaluación de la admisión.

* Documentos opcionales.

DOCUMENTOS ADICIONALES

  • Documento 1 - Carta de motivación aspirante.
    * El aspirante: (1) explica sus razones profesionales y personales para realizar el doctorado, (2) informa de sus logros y méritos académicos, (3) comenta sobre su experiencia en investigación en el área del conocimiento asociado al doctorado que aspira, (4) aclara cuáles serán sus potenciales fuentes de financiación y (5) informa cuál es su disponibilidad de tiempo para dedicarse a los estudios.
  • Documento 2- Pre-propuesta del tema o idea a desarrollar durante el posgrado avalada por un docente de la Universidad Nacional quien será su tutor. (máximo 5 paginas).
  • Documento 3 - Carta de compromiso del profesor tutor El profesor certifica: (1) que asume el compromiso de ser tutor y eventualmente director de tesis del aspirante, (2) que cuenta con el tiempo necesario para orientar un nuevo estudiante, (3) que están disponibles los recursos mínimos necesarios para que el aspirante proponga y desarrolle su tesis de doctorado. La carta de compromiso del tutor debe enviarse directamente desde el email institucional del profesor.

NOTA: Aquellas personas que ingresan por admisión anticipada o admisión automática (Universidad Nacional de Colombia), deben diligenciar la aplicación de envío de documentos con el fin de registrar su hoja de vida en el programa.

FORMA DE RECEPCIÓN DE LA DOCUMENTACIÓN

La recepción de documentos se realizará mediante el diligenciamiento de la aplicación web, en la que se realizará el cargue de soportes y documentos adicionales. Cada aspirante recibirá un correo electrónico por parte de la Vicedecanatura Académica de la Facultad con el enlace web e instructivo correspondiente.

La Facultad de Ingeniería de la Universidad Nacional de Colombia, no se hace responsable en caso de que el aspirante no pueda ingresar sus datos y documentos satisfactoriamente por medio de la aplicación web, debido a la demanda de usuarios simultáneos que superen la capacidad del sistema. Se recomienda adelantar el proceso con anterioridad a la fecha de cierre.

TENGA EN CUENTA LAS SIGUIENTES RECOMENDACIONES:

  • Adelantar el proceso de cargue de documentos con anterioridad a la fecha de cierre.
  • Verificar que cuente con todos los documentos requeridos, cada uno en formato PDF(únicamente) y que no exceda el tamaño de 10MB.
  • Disponer de tiempo suficiente para efectuar el cargue de los documentos. El cargue de los documentos puede hacerlo por partes, cerrando sesión cada vez que termine de cargar cada parte de la documentación solicitada.
  • Los documentos relacionados con un (*) son opcionales, los demás son obligatorios.
  • Para realizar cambios en los documentos que ha cargado previamente, debe cargar el nuevo documento y guardar los cambios. El nuevo documento reemplazará el cargado previamente.
  • El aplicativo mediante un menú indica la cantidad de registros cargados en cada sección y señala en color rojo la sección en la cual no hay soportes cargados.
  • Contactar previamente a las personas que relacionará como referencias, y asegurarse que ingresen las recomendaciones dentro del plazo establecido.
  • Al finalizar de cargar la totalidad de la documentación, bastará con cerrar sesión para guardarla. Esta información quedará almacenada y será enviada automáticamente a los evaluadores después del cierre del aplicativo.

CRITERIOS DE ADMISIÓN

La reglamentación del proceso de admisión de los programas de posgrado de la Universidad Nacional de Colombia se encuentra en la Resolución 035 de 2014 de la Vicerrectoría Académica, en específico, la Facultad de Ingeniería se detalla algunos aspectos mediante el Acuerdo 028 de 2016 del Consejo de Facultad de Ingeniería, la ponderación de sus componentes es:

Componente

Ponderación

Hoja de vida

Eliminatorio: No

30

Pruebas

Eliminatorio: No

20

Entrevista

Eliminatorio:

50

TOTAL

Puntaje mínimo aprobatorio:
3.0 sobre 5.0

100

Criterios de evaluación Hoja de Vida

En la evaluación de la hoja de vida se considerarán los siguientes aspectos:

  • Afinidad de los títulos de pregrado y posgrado con el perfil del programa de doctorado.
  • Experiencia profesional.
  • Experiencia investigativa.
  • Desempeño académico previo.
  • Referencias académicas
  • Distinciones académicas
  • Producción intelectual
  • Experiencia docente.

Criterios de evaluación pruebas

NO HAY PRUEBA ESCRITA- LA VALORACIÓN DE CONOCIMIENTO SE REALIZA EN LA ENTREVISTA.

Criterios de Entrevista

  • Compromiso con el programa, razones para adelantar estudios de posgrado.
  • Disponibilidad de tiempo para atender el programa.
  • Suficiencia económica.
  • Capacidad para trabajar en grupos de investigación.
  • Habilidades comunicativas.
  • Experiencia en la línea de investigación o profundización en la que pretende trabajar.

Suficiencia de idioma extranjero

Tomado del ACUERDO 4 DE 2023 DEL CONSEJO DE FACULTAD DE INGENIERÍA ARTÍCULO 1. Modificar el Artículo 2 del Acuerdo 28 del 18 de febrero de 2016, el cual quedará así:

“ARTÍCULO 2. Requisito de idioma para la admisión a los programas curriculares de especialización, maestría o doctorado. En la admisión a programas de Especialización, Maestría y Doctorado de la Facultad de Ingeniería, no se exigirá la acreditación de suficiencia de conocimientos de idioma inglés.

PARÁGRAFO 1. La acreditación de suficiencia de conocimientos de idioma inglés es requisito para que los estudiantes de programas de Doctorado de la Facultad inscriban la actividad académica Examen de Calificación.

PARÁGRAFO 2. La suficiencia de conocimientos de idioma inglés se acreditan con el nivel B1 según las equivalencias dadas por el Marco de Referencia Europeo para el Aprendizaje, la Enseñanza y la Evaluación de las Lenguas, a través de las siguientes opciones:

a) Presentar el examen de suficiencia de la prueba de idioma inglés administrada por la Universidad. Esta posibilidad estará sujeta a que dicha prueba esté disponible para el interesado. El resultado deberá ser aprobatorio.

b) Presentar uno de los siguientes documentos para certificar la suficiencia:

1. Certificado de estudios expedido por una institución de educación superior nacional o internacional, indicando que ha cursado un total acumulado de horas equivalente al requerido para alcanzar el nivel B1 (375 horas).

2. Certificado de un examen estandarizado y reconocido nacional o internacionalmente.

3. Otros exámenes o certificados equivalentes al nivel B1, de acuerdo con la tabla de equivalencias, regida por la Circular 1 de 2016 de la Vicerrectoría Académica.

Nota mínima de admisión

La nota mínima de admisión una vez ponderados todos los componentes del examen de admisión, será de 3.0 sobre 5.0

Reglamentación asociada al proceso


word2.pngACUERDO 028 DE 2016

word2.pngRESOLUCIÓN 035 DE 2014

CONTACTO

Área Curricular: Ingeniería Mecánica y Mecatrónica

Director(a) Área Curricular: Fernando José Rodríguez Mesa

Teléfono Área curricular: (+57) (601) 3165000 Option 0 Ext. 13646

Correo Área curricular: diracdimm_fibog@unal.edu.co


Coordinador(a) del Programa: Liz Karen Herrera Quintero

Correo de contacto: doccyt_fibog@unal.edu.co

Dirección: Carrera 30 # 45 - 03 - Campus: Ciudad Universitaria - Edificio: 453 - Oficina 412

Teléfono: (+57) (601) 3165000 Option 0 Ext. 14062

AUTOEVALUACIÓN/ACREDITACIÓN

Estado: Programa de Doctorado acreditado en alta calidad por seis (6) años por el Ministerio de Educación Nacional mediante Resolución No. 002322 del 1 de marzo de 2022, el Ministerio de Educación le ha conferido la mención Luis López de Mesa al Programa.

PH.D. IN MATERIALS SCIENCE, ENGINEERING AND TECHNOLOGY

The opening of the PhD program in Engineering - Materials Science and Technology at the Faculty of Engineering of the National University of Colombia was approved by the Academic Council of the university in July 2007 and began its work in the first semester of 2008.

Researchers and research groups belonging to the Faculties of Engineering and Sciences where the curricular areas of Mechanical and Mechatronic Engineering, Civil and Agricultural Engineering, Chemical Engineering, Physics and Chemistry collaborate, participate in this program, It is also supported by the Faculty of Dentistry and the Institute of Extension and Research

The science and engineering of materials has been recognized in several documents and development plans of international and national entities, as an area of knowledge vital for the development of countries, covering such important topics as nanotechnology, surface treatments, laser and plasma processing, sensory, biomaterials, intelligent materials, new materials, welding, superconductors, semiconductors, rapid prototyping, superalloys, etc. For this reason, it is important for researchers with doctoral degrees in this area to be trained in the country in order to contribute to the survival of the national industry and to encourage the creation of new technology-based companies, vital to the current globalized economy.

GENERAL INFORMATION

    • Education level PhD
    • Type of curriculum Research
    • Curricular program: PhD in Materials Science, Engineering and Technology
    • Title granted: PhD. in Engineering – Materials Science and Technology
    • SNIES code: 53272
    • Creation year: 2005
    • Opening year: 2007
    • Campus: Bogotá
    • Faculty: Ingeniería
    • Estimated duration: 8 semesters
    • Total credits: 135

Academic fee

Administrative fee

Welfare fee

Insurance fee

200

30

10

26,000 COP

PROFILES

Candidate Profile

Other professional profiles other than those of Engineering and Natural Sciences may participate as candidates for this Program, whose curricula seen in the Undergraduate and/or Master’s degrees have the subjects, intensity and contents that the Postgraduate Advisory Committee considers that they meet the minimum requirements for the successful development of the research topic to be addressed and that they are authorised by the Council of the Faculty of Engineering.

Graduate Profile

Graduates of this program will be able to relate the structure to the properties and performance of materials, propose direct and conduct research autonomously, produce original knowledge, apply the knowledge generated in the solution of real world problems, participate in the construction of academic communities in the areas of the synthesis and processing of materials and transfer the results of research to the productive sector, to contribute to the development, modernisation and technological innovation of national industry.

OBJECTIVES

The general learning outcomes of the program are:

  • To conduct research and development to increase the volume of knowledge and create new applications to expand the country’s technological capacity.
  • To educate university professors to develop and improve teaching and research work in engineering in the region and the country.
  • To strengthen university-industry interaction for the development of studies and research and for the exchange of experiences in the field of engineering and in particular materials and their processing.
  • To educate researchers.
  • To strengthen the lines of research in the area of Materials Science and Engineering that serve as the basis for the doctoral program and the master program that is currently being developed.

The specific learning outcomes of the curriculum are:

  • To form human resources of a high academic level to contribute to the creation of new knowledge in the areas of Science and Engineering of Materials.
  • To build human resources with the capacity and leadership to establish and lead research groups.

CURRICULUM STRUCTURE

Academic Activities and Courses

Credits

Thesis

90

Thesis Project

13

Research Seminar

6

Qualifying Exam

6

Total Academic Activities

115

Eligible Courses

20

Total Research Courses

135

SUBJECTS AND COURSES


Obteniendo datos del Sistema de Información Acádemica SIA

NOTA:

  • Courses are offered every semester. **For the full list of courses offered, please refer to https://siabog.unal.edu.co/buscador

  • The timetable for postgraduate courses is usually in the 7:00 to 9:00 and 18:00 to 20:00 bands.

RESEACRH

Research Lines

  • Surface Engineering
  • Manufacturing and Metallurgy Processes
  • Polymer Materials
  • Structural Mechanics
  • Ceramic and composite materials
  • Nanomaterials
  • Materials for Construction and Sustainable Development

ADMISSION PROCEDURE

PhD. in Materials Science, Engineering and Technology

Call for proposals 2021-01

NON-MASS ADMISSION PROCESS

GENERAL CLARIFICATIONS:

  • If you have completed undergraduate studies at the National University of Colombia, you still have credits and are interested in obtaining the benefit to pursue postgraduate studies at the university, access this link for more information http://www.legal.unal.edu.co/rlunal/home/doc.jsp?d_i=36926

If you are a foreign student, click on the link for more information Aspirantes Extranjeros. We clarified that the certificates of admission / acceptance letters (if required) are issued only to applicants selected by the National University in the admissions process established.


Admission to the doctorate is permanent and is carried out through non massive processes (different from those of admission to undergraduate and master’s degrees). The type of study is full-time on-site.

STEP-BY-STEP GUIDE

  • Pay registration fees.The cost of admission fees for the year 2020 is COP$293,000, which you can pay at any branch of the Banco Popular or virtual payment at: http://www.pagovirtual.unal.edu.co/index.php.
    Applicants outside Colombia must make an electronic payment of US$195. Once the transaction is completed you will find the link "Continue Registration", if this is your wish follow the link and you can formalize your registration. Please note that at the time of registration you are requested the "Transaction Number" and the "Confirmation Number", remember that you must have noted them or have the copy of the voucher that is sent to the email registered at the time of payment. Having these numbers, enter them in the step in which they are requested and continue with the process of formalizing their registration.
  • Formalize registration online. Internet. It must be done through the website  https://www.uninscripciones.unal.edu.co/sitio/selPeriodo!input.action, in which you must log in to the corresponding process and then select Graduate Enrollment. No more than three days after payment you must register, so that the link to complete the application of resume support (Send payment support to doccyt_fibog@unal.edu.co and lkherreraq@unal.edu.co).
  • Complete the application for resumes as agreed with the PhD coordinator.
  • Attend the interview.  The date of presentation of the interview will be arranged with the coordination of the doctorate.
  • Consult the publication of final results. To view the results, please go to page www.admisiones.unal.edu.co, Postgraduate Section, under the Results option, according to the schedule set out in the corresponding call.

REQUIRED DOCUMENTATION

Documents marked with (*) are optional. However, these supports give points within the rating of the resume, it is recommended to attach them in case of having them.

a) CURRICULUM VITAE

  • Identification document..
  • Professional card*
  • Support for university studies:
    • Degree Certificate
    • Diploma.
    • Transcript of grades.
    • Document legalized by apostille or diplomatic delegation (in the case of certificates obtained abroad)
    • Certificate of completion of studies issued by the institution where he/she studied (for students who do not yet have an undergraduate degree)
    • Academic History Report (for undergraduate students of the National University of Colombia with choice of graduate degree)
  • Academic Honors*:
    • Name of the distinction, institution that grants, date on which it was granted (please attach the supporting documentation).
  • Professional Experience*:
    • Name of the institution or company, type of relationship, start and end date (or in progress), position, main function and attach support of it.
  • Experience as a Professor*:
    • Name of the institution, dedication of the company, start and end date (or in progress), areas of work, information of subjects taught and intention of hours per week and attach support.
  • Research Experience*:
    • Name of the research project, institution, project area, funding entity, main functions, start date of linkage and completion (or ongoing), country and attach support.
  • Intellectual Production*:
    • Type of production (article in indexed journal, book, book chapter, patent, software, pilot plant, industrial design, other production), production data and attach support.
  • Certifications of Language Proficiency*:
    • English is not required as a requirement in the admission process, however, attach support if you have it.
  • Academic or professional references*:
    • The website will ask you for the basic contact details of two people who will register 2 academic or professional references according to the profile to which you aspire (academic references apply to the research profile, whereas academic or professional references apply to the deepening profile). The information provided by the persons you indicate is confidential and will be known only to the program directives during the admission evaluation process.

    ADDITIONAL DOCUMENTATION

    • Document 1 - Aspiring Letter of Motivation. The candidate: (1) explains his or her professional and personal reasons for taking the doctorate, (2) reports on his or her academic achievements and merits, (3) comments on his or her research experience in the area of knowledge associated with the doctorate he or she aspires to, (4) clarifies what their potential sources of funding will be and (5) reports on their availability of time for study.
    • Document 2- Proposal of the topic or idea to be developed during the postgraduate course endorsed by a professor of the National University who will be his tutor. (maximum 5 pages).
    • Document 3 - Tutor Teacher Commitment Letter The teacher certifies: (1) that he assumes the commitment to be tutor and eventually thesis director of the applicant, (2) that he has the necessary time to guide a new student, (3) that the minimum resources necessary for the candidate to propose and develop his doctoral thesis are available. The tutor’s engagement letter must be sent directly from the teacher’s institutional email.

    NOTE: Those people who enter by early admission or automatic admission (National University of Colombia) must apply for the sending of documents in order to register their resume in the program.

    SUBMISSION OF DOCUMENTATION

    The reception of documents will be carried out by filling out a web application, in which the supports and documents mentioned in the previous section will be loaded. Each applicant will receive an email from the Academic Vice-Deanship of the Faculty with the corresponding web and instructional link.

    The Faculty of Engineering of the National University of Colombia, is not responsible in case the applicant cannot enter his data and documents satisfactorily through the web application, due to the demand of simultaneous users exceeding the capacity of the system. it is recommended to advance the process before the closing date

    PLEASE BEAR IN MIND THE FOLLOWING RECOMMENDATIONS:

    • Advance the document loading process prior to the closing date.
    • Verify that you have all required documents, each in PDF format (only) and that it does not exceed the size of 10MB.
    • Allow sufficient time to load the documents. Loading of documents can be done in parts, closing each time you finish loading each part of the requested documentation.
    • The documents related to a (*) are optional, the others are mandatory. However, these supports give points within the qualification of the resume, it is recommended to attach them in case of having them.
    • To make changes to documents you have previously loaded, you must load the new document and save the changes. The new document will replace the previously loaded one.
    • The application using a set of choices indicates the number of records loaded in each section and points in red to the section in which there are no loaded supports.
    • Previously contact the people you will relate to as references, and make sure that you enter the recommendations within the set deadline.
    • After loading the entire documentation, it will be enough to log out to save it. This information will be stored and sent automatically to the evaluators after application closure.

    ADMISSION CRITERIA

    The regulations governing the admission process for postgraduate programmes of the National University of Colombia are contained in Decision 035 of 2014 of the Academic Vice-rectory, specifically the Faculty of Engineering details some aspects by Agreement 028 of 2016 of the Faculty of Engineering Council, the weighting of its components is as shown below:

    Component

    Weighting

    Qualifying

    Minimum approval score

    Curriculum Vitae

    30

    No

    -

    Exams

    20

    No

    -

    Interview

    50

    Yes

    -

    TOTAL

    100

    3.0 over 5.0

CV Assessment criteria

The following items in the CV assessment will be taken into account:

  • Affinity of undergraduate and postgraduate degrees with the profile of the doctoral programme.
  • Professional experience.
  • Research experience.
  • Previous academic performance.
  • Academic references.
  • Academic distinctions.
  • Intellectual production.
  • Experience as a Professor.

Exams Assessment Criteria

THERE IS NO WRITTEN EXAM- THE ASSESSMENT OF KNOWLEDGE IS MADE IN THE INTERVIEW.

Interview Assessment Criteria

  • Commitment to the program, reasons to advance postgraduate studies.
  • Availability of time to attend the program.
  • Economic sufficiency.
  • Ability to work in research groups.
  • Communication skills.
  • Experience in the line of research or deepening in which he intends to work.

Proficiency of foreign language

Applicants for the Doctoral Programme in Engineering must demonstrate proficiency in a foreign language (English). The sufficiency test is eliminatory, the applicant must demonstrate at least a B1 level of English, otherwise he will not be admitted.

At the time of registration via the internet (step 2), the applicant will be asked if he wants to approve the English proficiency test, he can select from the following options:

  • Be a graduate of an undergraduate program at the National University of Colombia.
  • If you are a graduate of a postgraduate program from the National University of Colombia and obtained a grade equal to or higher than 3.5 in the English exam presented in the admission process.
  • Achieve the level of sufficiency required by the University through the test applied by the National Admissions Directorate.
  • Present a foreign language certificate with a validity of less than two years. See Homologate proof of knowledge in English. To present the certificate you must deliver the original and current certificate, within the schedule established by the respective call during the registration period, to the National Admissions Directorate (Calle 44 No. 45-67, Bloque B3, Unidad Camilo Torres, Bogotá D.C., from Monday to Friday in continuous working day from 8:00 am to 5:00 pm); or send to the email qualifier@unal.edu.co a digital image of the original and current certificate, that is, with a date of submission not later than two years of the test being applied for. The duration of the certificate is counted with respect to the start date of the registration process.

Minimum admission score

The minimum admission mark after weighting all the components of the entrance examination shall be 3.0 out of 5.0

CONTACT

Curricular area: Mechanical and Mechatronic Engineering

Director: Aldo Germán Benavides Morán

Telephone: (+57) (1) 3165000 Ext. 13646

Email: diracdimm_fibog@unal.edu.co


Program Coordinator: Liz Karen Herrera Quintero

Email: doccyt_fibog@unal.edu.co - lkherreraq@unal.edu.co

Telephone: (+57) (1) 3165000 Ext. 14107

Address: Av. NQS (Carrera 30), 45-03, Campus Ciudad Universitaria, Building 407, Office 103A

QUALITY AND ACCREDITATION

Current status: In process of self-assessment

Self-assessment starting Date: 2010-02